9 Best Multiprocess Welders for MIG, TIG, and Stick (November 2026)

The best multi process welding machines for MIG, TIG, and Stick include the ARCCAPTAIN 200A MIG Welder 110V 220V for broad MIG flexibility, the Weldpro Omni210 MIG Welder 200A Multi-Process Welder for AC/DC TIG range, and the Lincoln Electric 90i FC Flux Core Wire for portable flux-core jobs.

On this page (4 sections)

1. How we chose these multi process welding machines
2. Which multiprocess welders stand out for workshop use?
3. What should you check before buying a multiprocess welder?
4. Which multi process welder should you choose?

The ARCCAPTAIN 200A MIG Welder 110V 220V is the best multi process welding machine for a workshop that needs gas or gasless MIG, Stick, and Lift TIG in one unit. For AC/DC TIG, compare the Weldpro Omni210; for a lighter gasless MIG, Stick, and Lift TIG option, consider SEESII.

A multiprocess machine saves space by combining modes, but the modes do not all work the same way. Torch type, wire-feed setup, input power, and included accessories can change what you can do straight out of the box.

Start with What Is a Multi Process Welder? The Basics if you want a quick explanation of the process names.

If you are new to welding, our best multi process welder for beginners guide focuses on ease of setup.

Our picks at a glance

1. 1
   Best for broad MIG flexibility

   ARCCAPTAIN 200A MIG Welder 110V 220V

   9.7/10 our score

   See it on Amazon
2. 2
   Best for AC/DC TIG range

   Weldpro Omni210 MIG Welder 200A Multi-Process Welder

   9.6/10 our score

   See it on Amazon
3. 3
   Best for portable flux-core jobs

   Lincoln Electric 90i FC Flux Core Wire

   9.5/10 our score

   See it on Amazon

4. 4

   SEESII 135A MIG Welder 110V

   Best for a light 3-process setup
   Check it
5. 5

   FEMEROL Plasma Cutter Welder Combo 200A Gas

   Best for welding and cutting
   Check it
6. 6

   Weldpro 200A AC/DC TIG Welder with Pulse

   Best for TIG-led work
   Check it
7. 7

   Forney 271 Easy Weld 140 MP Multi-Process

   Best for straightforward 120V welding
   Check it
8. 8

   FEMEROL 250A MIG Welder

   Best for higher stated MIG output
   Check it
9. 9

   GZ GUOZHI 145A MIG Welder

   Best for basic gasless MIG and Stick
   Check it

How we chose these multi process welding machines

We compared the listed process modes, input voltage, stated output, controls, and included accessories against the needs of someone switching among common workshop welding processes. Our score weighs specs and features against that use, with buyer feedback as an additional signal.

The machines here do not all cover MIG, TIG, and Stick in the same way. Some offer Lift TIG, some add AC/DC TIG, and one option is a flux-core-only welder included for buyers whose actual job needs may be narrower than the keyword suggests.

Check each machine's torch and spool-gun requirements before deciding. A listed mode may still require a separately purchased torch or accessory.

Which multiprocess welders stand out for workshop use?

The best fit depends on which processes you use most often and what power is available in your shop. For home workshop choices, see our best welders for home use.

These picks are ordered by score, with the top position going to the machine that covers the broadest mix for the target search.

1. ARCCAPTAIN 200A MIG Welder 110V 220V: Best for broad MIG flexibility

1

ARCCAPTAIN 200A MIG Welder 110V 220V: Best for broad MIG flexibility

9.7/10Our score

• Gas and gasless MIG
• Stick and Lift TIG
• Spot welding
• 110V/220V

A wide process mix covers gas and gasless MIG, Stick, Lift TIG, and spot welding. Synergic setup matches current and wire speed to wire and gas selections.

See it on Amazon

Pros

• Gas and gasless MIG options
• Dual voltage
• Stores 10 settings for each mode

Cons

• TIG torch and spool gun are not included
• Some wire rollers must be bought separately

The ARCCAPTAIN combines gas MIG, gasless flux-core MIG, Stick, Lift TIG, and spot welding. A spool gun connector is available, but the spool gun and TIG gun are not included.

Its synergic MIG setting matches suggested current and wire speed to the selected wire diameter and gas material. You can still adjust the current, and the machine stores 10 preset settings for each welding mode.

The digital display shows welding data, and the machine supports both 110V and 220V input. Wait until the screen turns off before switching between input voltages.

Choose it if your work changes between wire-feed welding and Stick, with occasional Lift TIG or spot work. Confirm which rollers and torches you need before planning a specific setup, since some wire rollers are sold separately.

2. Weldpro Omni210 MIG Welder 200A Multi-Process Welder: Best for AC/DC TIG range

2

Weldpro Omni210 MIG Welder 200A Multi-Process Welder: Best for AC/DC TIG range

9.6/10Our score

• MIG, flux-core, Stick, AC/DC TIG
• Up to 200A
• 110V/220V operation
• Includes foot pedal and TIG torch

The Omni210 combines MIG and Stick with AC/DC TIG, plus a spool gun option. A foot pedal and TIG torch are included with this configuration.

See it on Amazon

Pros

• AC/DC TIG capability
• Up to 200A for MIG, TIG, and Stick
• Includes foot pedal and KT26 TIG torch

Cons

• Heavier at 81.8 lb
• Confirm included configuration and power setup for your work

The Omni210 combines MIG, flux-core, Stick, and AC/DC TIG, with a spool-gun option. It is the broadest TIG choice in this roundup for buyers who want both AC and DC TIG modes alongside MIG and Stick.

Weldpro states output up to 200A for MIG, TIG, and Stick, and the machine supports 110V and 220V operation. Compare 220V stick welder options for stick-focused alternatives.

The included configuration lists a KT26 TIG torch and foot pedal, along with a MIG torch and flow meter.

At 81.8 lb, it is much heavier than the compact 110V machines here. Plan for a fixed workshop spot or a suitable way to move it if you need to change work areas.

Choose it when AC/DC TIG is a real part of your work, not just a possible future use. Compare the torch configuration and electrical requirements with your shop before buying.

3. Lincoln Electric 90i FC Flux Core Wire: Best for portable flux-core jobs

3

Lincoln Electric 90i FC Flux Core Wire: Best for portable flux-core jobs

9.5/10Our score

• 120V input
• Flux-core welding
• 15 lb inverter design
• Metal case and shoulder strap

This is a portable flux-core wire welder for small jobs, not a MIG, TIG, and Stick multiprocess machine. It earns a place for readers whose actual need is simple wire welding and portability.

See it on Amazon

Pros

• Works from 120V power
• 15 lb design with shoulder strap
• Metal case

Cons

• Does not offer TIG or Stick modes
• Flux-core focused rather than multiprocess

The Lincoln Electric 90i FC is a flux-core wire welder, not a three-process machine. For other brand options, see our Lincoln Electric welder picks.

Its place here is for a buyer who decides a simple portable wire-feed setup matters more than TIG and Stick modes.

It runs from 120V input and weighs 15 lb. A metal case, shoulder strap, welding gun, nozzle, contact tip, work cable, and clamp are included.

Lincoln describes it for small jobs such as DIY projects, home repairs, and hobby work. Its two-knob controls adjust wire speed and voltage.

Pick it for small flux-core jobs where carrying a light machine matters. Choose a true multiprocess welder if you need TIG or Stick from the same power source.

4. SEESII 135A MIG Welder 110V: Best for a light 3-process setup

4

SEESII 135A MIG Welder 110V: Best for a light 3-process setup

9.4/10Our score

• Gasless MIG, MMA, Lift TIG
• 110V input
• 7.7 lb stated carry weight
• TIG torch not included

A compact 110V option for gasless MIG, Stick, and Lift TIG. It includes a MIG torch and flux-core wire, while the Lift TIG torch must be sourced separately.

See it on Amazon

Pros

• Three processes in a compact unit
• Includes MIG torch and 1 lb flux-core spool
• Over-current and over-heating protection

Cons

• Lift TIG torch is not included
• Limited to 135A output

SEESII combines gasless flux-core MIG, Stick, and Lift TIG in a 110V machine. It weighs 7.7 lb according to the product name, and the package includes a MIG torch and a 1 lb spool of flux-core wire.

The Lift TIG torch is not included, so budget for the torch separately if you plan to use that mode. Its output range is stated as 30A to 135A.

This combination suits quick repairs and small projects where carrying the machine is a priority. Gasless MIG also avoids the need to bring a shielding-gas cylinder for that process.

Choose it if you need three modes on household voltage and can work within the stated output range. For aluminum TIG, look for an AC TIG machine instead.

5. FEMEROL Plasma Cutter Welder Combo 200A Gas: Best for welding and cutting

5

FEMEROL Plasma Cutter Welder Combo 200A Gas: Best for welding and cutting

9.3/10Our score

• Gas MIG, flux-core, HF TIG, Stick, spot, plasma cutting
• 110V/220V
• Includes TIG and plasma torches

This combo adds plasma cutting to MIG, HF TIG, Stick, and spot welding. Choose it if cutting belongs in the same machine plan, and account for the air supply its plasma cutter uses.

See it on Amazon

Pros

• Combines welding processes with plasma cutting
• Includes plasma and TIG torches
• Synergic or manual MIG controls

Cons

• Heavier at 42 lb
• Plasma cutting requires compressed air

This FEMEROL combines gas MIG, flux-core MIG, HF TIG, Stick, spot welding, and plasma cutting. It is the most process-diverse option here if cutting is also part of your workshop work.

The package includes MIG, plasma-cutting, and TIG torches, plus an air filter regulator and gas hose. The plasma cutter uses compressed air, so make sure your shop setup can supply it.

The machine supports 110V and 220V through the included adapter. FEMEROL states a 10 mm ideal clean cut and a 16 mm maximum severance cut under 220V, with a 60% duty cycle.

Choose it when plasma cutting belongs in the same work plan as welding. For a deeper comparison of combo formats, see multiprocess welder with plasma cutter.

6. Weldpro 200A AC/DC TIG Welder with Pulse: Best for TIG-led work

6

Weldpro 200A AC/DC TIG Welder with Pulse: Best for TIG-led work

9.2/10Our score

• AC TIG, DC TIG, pulse TIG, Stick
• 110V/220V
• Foot pedal included
• TIG torch included

This TIG-first machine includes several AC and DC TIG modes plus Stick. It does not add MIG, so it fits best when precision TIG work matters more than wire-feed flexibility.

See it on Amazon

Pros

• AC and DC TIG modes with pulse
• Foot pedal and TIG torch included
• Dual voltage

Cons

• No MIG mode
• Weighs 61.8 lb

This Weldpro is a TIG and Stick machine, not a MIG/TIG/Stick combo. Its five modes are high-frequency AC TIG, DC TIG, AC pulse TIG, DC pulse TIG, and Stick MMA.

A foot pedal, TIG torch, gas hose, and flow meter are included. Dual voltage supports 110V and 220V, and the product information describes pulse controls for TIG work.

It weighs 61.8 lb, so it is better suited to a work area where you can leave it set up. The machine's AC TIG modes make it relevant to aluminum TIG, but check the manual for the material and setup details you need.

Choose it if TIG is the main process and Stick is a useful second option. For other AC TIG choices, see best multiprocess welder with AC TIG.

7. Forney 271 Easy Weld 140 MP Multi-Process: Best for straightforward 120V welding

7

Forney 271 Easy Weld 140 MP Multi-Process: Best for straightforward 120V welding

9.1/10Our score

• MIG, DC TIG, Stick
• 120V input
• Three-position process switch
• All-metal case

A 3-process machine with a 120V input and a simple process switch. Infinite voltage and wire-feed adjustments give you control over MIG setup.

See it on Amazon

Pros

• MIG, DC TIG, and Stick in one unit
• Straightforward three-position switch
• Includes MIG gun, electrode holder, and ground clamp

Cons

• No AC TIG mode
• Limited to a 120V input

Forney's 140 MP covers MIG, DC TIG, and Stick from a 120V input. A three-position switch changes processes, while infinite voltage and wire-feed adjustments let you tune MIG settings.

The included accessories are a 10 ft MIG gun, 8 ft electrode holder, 8 ft ground clamp, and an adapter. Its all-metal case gives it a straightforward workshop form.

This model suits buyers who want the three common process types without dual voltage or AC TIG. It weighs 25.8 lb, which is heavier than the small 110V options but still within a manageable class for a shop machine.

Choose it for basic MIG, DC TIG, and Stick work on 120V. For another three-process option, compare Forney MIG and stick welders.

If you need aluminum TIG, look for AC TIG capability instead.

8. FEMEROL 250A MIG Welder: Best for higher stated MIG output

8

FEMEROL 250A MIG Welder: Best for higher stated MIG output

9.0/10Our score

• Gas and gasless MIG, Stick, Lift TIG, spot
• Spool gun compatible
• 110V/220V
• 250A stated output

This FEMEROL adds a higher stated MIG output and spool-gun compatibility to a mix that includes Stick and Lift TIG. TIG gun and spool gun are not included.

See it on Amazon

Pros

• Gas and gasless MIG options
• Spool-gun compatible
• Dual voltage

Cons

• TIG gun and spool gun sold separately
• Confirm process-specific setup for your jobs

This FEMEROL offers gas and gasless MIG, Stick, Lift TIG, and spot welding, with spool-gun compatibility. Its stated output is 250A, and it supports 110V and 220V input.

The MIG controls can automatically match current and wire speed to wire diameter and gas selection. Manual current adjustment is also available.

The TIG gun and spool gun are not included. FEMEROL describes aluminum welding through a Teflon wire-feed tube or a spool gun, so check the required setup and accessories for your process.

Choose it if the broader MIG setup and higher stated output matter more than having a TIG torch included. Compare the input power and welding requirements for your material before settling on a model.

9. GZ GUOZHI 145A MIG Welder: Best for basic gasless MIG and Stick

9

GZ GUOZHI 145A MIG Welder: Best for basic gasless MIG and Stick

8.9/10Our score

• Gasless MIG, Stick, Lift TIG
• 110V input
• Synergic or manual settings
• Supports 2 lb wire spools

This 110V machine covers gasless MIG and Stick, with Lift TIG available using an extra torch. Its maker describes it for wire up to 2 lb spools.

See it on Amazon

Pros

• Synergic and manual MIG settings
• Supports 2 lb spools
• Portable design

Cons

• Does not support gas MIG
• Lift TIG torch is extra

The GZ GUOZHI combines gasless MIG, Stick, and Lift TIG when paired with an extra TIG torch. It runs on 110V and supports 2 lb spools of flux-core wire.

Its synergic mode adjusts voltage and wire speed as you change amperage, while manual mode allows separate parameter adjustments. The maker describes it for wire up to 2 lb and recommends welding thickness no more than 4 mm.

This machine does not support gas MIG. The extra torch requirement also matters if you want to use Lift TIG, so include that accessory in your setup plan.

Choose it for a compact 110V machine centered on flux-core MIG and Stick. If you need gas MIG, select a model with that process explicitly included.

What should you check before buying a multiprocess welder?

Start with the processes you will use every month, then check the included torch and input requirements. A machine with more modes can still be a poor fit if the mode you need requires an accessory you do not own.

Does Lift TIG meet your TIG needs?

Lift TIG uses a different start method from high-frequency TIG, and the torch may be an extra purchase. Check whether the machine includes a torch and whether its available TIG mode fits your materials and work style.

If aluminum TIG is a priority, look for AC TIG capability. Models with only DC TIG or Lift TIG do not offer the same mode set.

Do you need gas MIG or gasless flux-core MIG?

Gas MIG uses shielding gas, while flux-core wire can be used without a gas cylinder. Some multiprocess welders offer both; compact models in this group may only provide gasless MIG.

Choose based on where you work and the materials you join. Outdoor repair may favor a gasless setup, while gas MIG can be useful in a workshop with the right cylinder and regulator arrangement.

Can your outlet support the input you plan to use?

A 110V/220V label gives input options, but it does not mean every output level is available on a household outlet. Check the manual for circuit needs and output limits at each voltage.

For a 120V-only welder, confirm the outlet and extension-cord requirements. Avoid assuming that an adapter changes the capacity of the circuit.

Which accessories are included?

Compare the torches, ground clamp, electrode holder, gas hose, flow meter, and spool-gun support with your planned processes. TIG guns and spool guns are missing from some configurations, even when the machine can support the mode or connection.

A useful primer is How to Choose a Welding Machine – Explained. For a dedicated Stick option, see best handheld stick welder.

Which multi process welder should you choose?

Choose the ARCCAPTAIN if you want broad MIG flexibility with Stick and Lift TIG, and choose the Weldpro Omni210 if AC/DC TIG matters alongside MIG. For basic 120V MIG, DC TIG, and Stick, the Forney covers the core modes, while the Lincoln is a better match when portability and flux-core welding are enough.

A multi process welder works best when its modes match the jobs you actually do. Check the input power, torch requirements, and process-specific setup before you choose a machine.

Our top 3 picks at a glance

1. 1
   Best for broad MIG flexibility

   ARCCAPTAIN 200A MIG Welder 110V 220V

   9.7/10 our score

   See it on Amazon
2. 2
   Best for AC/DC TIG range

   Weldpro Omni210 MIG Welder 200A Multi-Process Welder

   9.6/10 our score

   See it on Amazon
3. 3
   Best for portable flux-core jobs

   Lincoln Electric 90i FC Flux Core Wire

   9.5/10 our score

   See it on Amazon

Frequently asked questions

What does a multiprocess welder usually do?

A multiprocess welder combines two or more welding methods in one machine. Common combinations include MIG, flux-core MIG, Stick, and Lift TIG, while some models add AC TIG, spot welding, or plasma cutting.

Check the exact modes and torch requirements before choosing, since the term does not guarantee every process is included.

Can one machine weld aluminum with MIG, TIG, and Stick?

It depends on the machine and setup. MIG aluminum may need a spool gun or a suitable wire-feed path, while AC TIG is commonly used for aluminum TIG work.

Stick capability alone does not mean a machine is ready for aluminum welding.

Confirm the process, torch, and consumables you need.

Is dual voltage worth it on a multiprocess welder?

Dual voltage can give you the option to use compatible 110V or 220V power. The available output and operating limits may vary with input voltage, so check the manual and electrical requirements for the process you plan to use.

Never assume a household outlet supports a machine's maximum output.

Do multiprocess welders include every torch?

No. Included accessories vary by model and configuration.

Some machines include MIG and TIG torches, while others require you to buy a TIG torch, spool gun, or other process-specific parts separately.

Compare the included equipment with the welding modes you expect to use.

Should I choose a welder and plasma cutter combo?

Choose a combo when plasma cutting is a regular part of your workshop jobs and you have the air supply and electrical setup it needs. A welding-only machine may be simpler if you mainly join metal.

See our guide to welder and plasma cutter combos for the tradeoffs.